What is Plasma Booster?

Plasma Booster is a high power amplifier which enhances combustion efficiency by drastically increasing the secondary current and providing multiple sparks in a unique way. All our products are made in Japan with high quality, reliability and safety unrivaled in the industry. Plasma Booster is also OBD II (On-Board-Diagnostics) compliant. Installation is easy. Simply wiring at the original ignition coil and you are all set for tuning!

Power/Torque Increase

Increased Throttle Response

Stable Engine
Start

Decreased Engine Throbbing

Smooth Boost Pressure

Engine Load Reduction

LED Loaded
(Type A/B)

Fail-Soft
Function

Easy
Wiring

Water
Resistant

Product Features

Plasma Booster lets a spark ignite more than three times at ultrafast speeds during one combustion process and also supercharges the sparks up to the highest RPM without damaging ignition plugs.

The secondary current (amperage) can be approximately double that of stock coils, which lowers the risk of detonation or preignition due to incomplete combustion.

The effect obtained by the above mentioned upgrade leads to more horsepower and torque throughout the entire RPM range.

Analysis by Oscilloscope

Double the Amperage for the Initial Spark Discharge

High efficiency combustion can be created by perfect growth of the flame core.

“Multi Spark” (Multiple Ignition) Provision

Additionally, ignition performance sees further gains by generating the sparks at a microsecond rate.

Noise Removal

To constantly stabilize provision of the sparks and prevent malfunction, abnormal noises are eliminated.

Plasma Booster Power Check

Plasma Booster operates throughout the entire RPM range.
*The results depend on the operational environment.

Examples of Installation

How to Install (For Transistor Ignition Type Engine)

  1. Connect the Plasma Booster colored-wire to the negative coil (for CDI ignition type engine, it connects to the positive coil) using the quick connector.
  2. Connect the Ground Lug to the Plasma Booster black wire. Use either the 6mm or 8mm, according to the hole size of the grounded object.
  3. Ground the Plasma Booster black wire to a suitable Engine Ground.

Plasma Booster Model Lineup

Contact

Do you have any questions about our products?
Do you want to know how our products work and benefit your car?
Do you need advice about which product to choose for your car?

Find a dealer

We have dealers specializing in our products all over Europe!
Just visit our dealer page and select one in your area to find their contact details. Can’t find a dealer in your area? Contact us or visit our shop.